"LCSAWALAN Cisco Lifecycle Services Virgin Wireless", very certified as 650-621 exam, is a Cisco certification. qq0-200

3.Refer to the exhibit. R1 and R2 belong to the RIP routing section that includes the networks 10.20.0.0/16 and 10.21.0.0/16. R3 and R4 are performing two-way route redistribution between OSPF and RIP. A network administrator has discovered that R2 is receiving OSPF routes for the networks 10.20.0.0/16 and 10.21.0.0/16 and a routing loop has occurred.Which activity testament right this problem? 9A0-056

A: Employ an inbound ACL to the R2 serial interface.
B: Pocket money the RIP administrative distance on R3 to 110.
C: Configure distribute-lists on R3 and R4.
D: Fix the OSPF default metric to 20.
E: Exchange the OSPF administrative distance on R3 to 110.
Correctly Answers: C

4.The first-hand frame is encapsulated and an fresh header is added before the frame is carried over a timber link. At the receiving end, the header is removed and the frame is forwarded to the assigned VLAN. This describes which technology?

A: DISL
B: DTP
C: IEEE 802.1Q
D: ISL
E: MPLS
Fair Answers: D

5.Refer to the exhibit. What is the backwash of the distribute-list order in the R1 configuration?

9A0-802 A: R1 will filter apart the 172.24.1.0/24 route from the R2 RIP updates.
B: R1 will coincide matchless the 10.0.0.0/24 route in the R2 RIP updates.642-444
C: R1 will filter the 10.1.0.0/24 and the 172.24.1.0/24 routes from the R2 RIP updates.
D: R1 will not filter any routes for there is no exact prefix match.
Genuine Answers: C

6.Refer to the exhibit. Routers RTA and RTB are running BGP on the contrary the session is active. What command needs to be added to base the BGP session?
A: ip route 10.10.10.1 255.255.255.255 s0/0
ip route 10.10.10.1 255.255.255.255 s0/1
B: network 10.10.10.0
C: neighbour 10.10.10.1 next-hop-self642-892
D: no synchronization
True Answers: A

7.Given the network configuration above and assuming that STP is enabled, which harbour will be elected the non-designated port?

350-018
A: Port 1/1
B: Port 1/2
C: Port 2/1
D: Port 2/2
E: Port 3/1
F: Port 3/2
Equitable Answers: B

8.On a 3550 EMI switch, which three types of interfaces can be used to configure HSRP? (Choose three.)

A:loopback interface
B:SVI interface
C:routed port
D:access port
E:EtherChannel port channel
F:BVI interface
Prerrogative Answers: B, C, E

9.Which three characteristics practice to IS-IS on the other hand not to OSPF? (Choose three.)

A:encapsulates PDUs directly into a data-link frame
B:uses a DIS and a backup DIS to ad hoc the psuedo-node on the LAN
C:uses stubby areas to elevate network scalability
D:uses a default IOS metric of 10 on everyone interface 9A0-061
E:runs PRC (Partial Route Calculations) to calculate IP reachability information
F:uses an on-demand course to chop the hi and LSA flooding across switched WAN links, such as ISDN
Exactly Answers: A, D, E

10.Which two statements are fitting approximately IBGP neighbor relationships? (Choose two.)

A:An EGP or static routing is required between IBGP neighbors. 70-624
B:A full-mesh IBGP requires that neighbor relationships be established between all BGP enabled routers in the free system.
C:IBGP neighbours must be in deviating unpaid systems.
D:The BGP split-horizon code specifies that routes learned via EBGP are never propagated to other IBGP peers.
E:The BGP split horizon law specifies that routes learned via IBGP are never propagated to other IBGP peers.
Licence Answers: B, E
Exceeding information:646-362 70-238 70-340 70-443 70-503(CSharp) 70-557